SUbranG classic weather proof

Recommended for use on: Strongly recommended for exterior surfaces based on concrete, gypsum, wood, masonry, brickwork & plaster of houses, high rise towers, hotels etc. It can also be used on interior surfaces if required. Application is to be done after proper dilution (depending on the application- brush, roller or spray) with clean potable and drinkable water.

The product is environmentally friendly and is completely free from harmful chemicals such as lead or added mercury etc.

Product Features:

·         Temperature Guard (reduce temperature upto 5 ͦ C).

·         Superior hiding, water resistance, low VOC properties.

·         UV Colour guard (resists colour fading with colour lock technology).

·         Resists efflorescence.

·         Dirt, Dust & Water Guard.

·         Bacteria & Fungus Guard.

·         Outstanding weather resistance and durability.

·         Non-toxic, free from formaldehyde, Nickel, Lead & Mercury etc.

Application Guide

New Surface:

Sand down the plaster with Emery stone and then remove the salt, alkali or any effloresce if present by washing with very dilute acid. Then apply a coat of Subrang Classic Wall Primer Sealer or Subrang Classic Water Base Primer, Followed by 2 coats of Subrang Classic Weather Proof.

Coating System#1: 1 Coat (Primer) + 2 Coats (Subrang Classic Weather Proof)

Coating System#2: 1 Coat (very diluted Weather Proof) + 2 Coats (Subrang Classic Weather Proof)

Old Painted Surface

Remove all dust, dirt and loose adhering or flaked paints by scraping. Then apply one thin coat of Subrang Classic Weather Proof or Subrang Classic Wall Primer Sealer or Subrang Classic Water Base Primer followed by 2 coats of Subrang Classic Weather Proof paint to finish.

Coating System: 1 Coat (Primer) + 2 Coats (Subrang Classic Weather Proof)

Technical Information:

1.    Theoretical Coverage: 14-17 m2 per liter per coat (Actual Coverage is dependent on substrate condition, application  method, application condition and finishing appearance) 

2.    Color: As per shade card

3.    Volume Solid: 40 % ± 2

4.    Dry Film Thickness: 28 ± 3 um per coat (based on substrate condition) 

5.    Finish: Matt

6.    Flash Point: Above 73 ˚F

7.    Drying Time: 01 – 02 hour (Dependent on temperature and humidity)

8.    Recoat Interval: 2 – 3 hours (Dependent on temperature and humidity)  

9.    Application Method: Brush / Roller and spray, dilute (by volume) the paint 30 – 50 % of fresh drinking water (This is a recommended method of application. Care should be taken to ensure an even application to avoid film defects)

10. Packing: 1 Liter quarter, 4 Liters gallon & 16 Liters drum.

Safety & Precautions

• Make sure there is ample ventilation available before, during and after painting.

• Keep children and pets away from painted areas and appliances.

• When applying paint, it is preferable to wear eye safety goggles and dust mask.

• Never leave opened container unattended.

• To clean paint from your hands, use soap and water only.

Storage & Handling

• Keep away from heat and spark sources, away from direct sunlight.

• Never breathe in dust, mist, gas or vapors from the dry product.

• Keep the containers closed in storage.

• Do not apply during rain/fog/mist/wind or when the temperature is below 5 °C.

• In case of eye contact: Wash with plenty of cold water and immediately consult a physician.

• In case of ingestion: drink plenty of water or milk, do not induce vomiting, & consult a doctor.

• In case of inhalation: remove the person to open fresh air area, provide artificial breathing if needed, and consult a doctor.

Disclaimer:

The information provided on this data sheet is not intended to be completed and is provided as general advice only. It is the responsibility of the user to ensure that the product is suitable for the purpose for which he wishes to use it. As we have no control over the treatment of the product, the standard of surfacration of the substrate, or other factors affecting the use of this product, we are not responsible for its performance nor would we accept any liability whatsoever or howsoever arising from the use of this product unless specifically agreed to in writing by us. The information contained in this data sheet may be modified by us from time to time, and without notice, in the light of our experience and continuous product development.