SUBRANG CLASSIC WALL PRIMER SEALER

Recommended for: Interior and Exterior Surfaces as a primer.

Color: White

Application Guide

New concrete surfaces:

Apply one coat of Subrang Classic Wall Primer Sealer after sanding the plaster, followed by two coats of Wall Primer Sealer Putty or Subrang Classic Wall Putty.

Old painted surfaces:

Remove all dust, Dirt and loose adhering or flaked paints by scarping. After scarping apply two coat of Subrang Classic Wall Primer Sealer.

First coat is used by slight over thinning, which will help the Sealer to penetrate into the surface. Then apply second coat of Sealer which helps further adhesion of putty.

Technical Information:

Theoretical Coverage: 12-14 m² per liter per coat (Actual Coverage is dependent on substrate condition, application method, application condition and finishing appearance)

Color: White

Volume Solid: 42 % ± 2

Dry Film Thickness: 28 ± 3 um per coat (based on substrate condition)

Finish: Matt

Flash Point: 36⁰C ± 2

Drying Time: Touch Dry 3-4 hours (Dependent on temperature and humidity)

Hard dry 24 hours (Dependent on temperature and humidity)

Recoat Interval: 10 - 12 hours (Dependent on temperature and humidity)

Application Method: Brush / Roller and spray, dilute (by volume) the paint 10 – 15 %. (This is recommended method of application Care should be taken to ensure an even application to avoid film defects)

Packing: 0.91 Liter, 3.64 Liters & 14.56 Liters drum

Safety & Precautions

• Make sure there is ample ventilation available before, during and after painting.

• Keep children and pets away from painted areas and appliances.

• When applying paint, it is preferable to wear eye safety goggles and dust mask.

• Never leave opened container unattended.

• To clean paint from your hands, use soap and water only.

Storage & Handling

• Keep away from heat and spark sources, away from direct sunlight.

• Never breathe in dust, mist, gas or vapors from the dry product.

• Keep the containers closed in storage.

• Do not apply during rain/fog/mist/wind or when the temperature is below 5 °C.

• In case of eye contact: Wash with plenty of cold water and immediately consult a physician.

• In case of ingestion: drink plenty of water or milk, do not induce vomiting, & consult a doctor.

• In case of inhalation: remove the person to open fresh air area, provide artificial breathing if needed, and consult a doctor.

Disclaimer:

The information provided on this data sheet is not intended to be completed and is provided as general advice only. It is the responsibility of the user to ensure that the product is suitable for the purpose for which he wishes to use it. As we have no control over the treatment of the product, the standard of surface preparation of the substrate, or other factors affecting the use of this product, we are not responsible for its performance nor would we accept any liability whatsoever or howsoever arising from the use of this product unless specifically agreed to in writing by us. The information contained in this data sheet may be modified by us from time to time, and without notice, in the light of our experience and continuous product development.