Subrang classic wall filling putty

Recommended for use on: Suitable to fill pores, dents and imperfections of wood, concrete and related surfaces. Compatible to water and solvent-based paints. The product can be applied to all types of interior surfaces only such as concrete, wood, and chipboard, etc.

Application Guide

NEW SURFACE:

New plaster must be completely dry, sand down the plaster with Emery stone or emery paper, and apply one coat of Subrang Classic Water Based Primer (or any interior primer based on the surface).

Subrang Classic Wall Putty is ready for use however slight addition of water is recommended for excessive absorbent plasters. Two coats of putty is applied, with an interval of 2-3 hours between coats. Sand down the surface with emery paper to a smoothen surface before the finishing paint (top coat) is applied.

OLD SURFACE:

Remove all dust, dirt and loose adhering or flaked paints by scarping with scraper (wall) or Emery Paper (for wooden surface). After scarping apply one coat of Subrang Classic Water Based Primer (or any interior primer based on the surface). Then apply second coat of Sealer which is followed by the application of Subrang Classic Wall Putty.

Apply the putty in thin layer, two (2) coats of putty should be applied for better finish. After the putty is completely dry, sand down the surface and apply top coat paint (such as Subrang Classic Water Base Matt) as per its application guide.

Subrang Classic Wall Putty is an environmentally friendly product which is completely free from harmful chemicals such as lead and mercury.

Technical Information

Theoretical Coverage: 4.5-5.5 m2 per kg per coat (Actual coverage is dependent on substrate condition, application method, application condition and finishing appearance)

Volume Solid: 44 % ± 2

Finish: Matt

Flash Point: None

Drying Time: 30 Mins (Dependent on temperature and humidity) 

Recoat Interval: 1 hour (Dependent on temperature and humidity)

Application Method: Putty knife, Trowel, Scraper 

Packing: 1.5 Kg , 5.5 Kg , 20 Kg

 Safety & Precautions

• Make sure there is ample ventilation available before, during and after painting.

• Keep children and pets away from painted areas and appliances.

• When applying paint, it is preferable to wear eye safety goggles and dust mask.

• Never leave opened container unattended.

• To clean paint from your hands, use soap and water only.

Storage & Handling

• Keep away from heat and spark sources, away from direct sunlight.

• Never breathe in dust, mist, gas or vapors from the dry product.

• Keep the containers closed in storage.

• Do not apply during rain/fog/mist/wind or when the temperature is below 5 °C.

• In case of eye contact: Wash with plenty of cold water and immediately consult a physician.

• In case of ingestion: drink plenty of water or milk, do not induce vomiting, & consult a doctor.

• In case of inhalation: remove the person to open fresh air area, provide artificial breathing if needed, and consult a doctor.

Disclaimer:

The information provided on this data sheet is not intended to be completed and is provided as general advice only. It is the responsibility of the user to ensure that the product is suitable for the purpose for which he wishes to use it. As we have no control over the treatment of the product, the standard of surface preparation of the substrate, or other factors affecting the use of this product, we are not responsible for its performance nor would we accept any liability whatsoever or howsoever arising from the use of this product unless specifically agreed to in writing by us. The information contained in this data sheet may be modified by us from time to time, and without notice, in the light of our experience and continuous product development.