SUBRANG CLASSIC RED-OXIDE PRIMER

Recommended for:

Steel, Wood Surfaces, Machinery, Storage Tanks Steel Fabrications, etc as a primer.

APPLICATION GUIDE

NEW SURFACE:

All dust and rust must be removed with a wire brush and paint should be applied immediately after cleaning.

OLD PAINTED SURFACE:

Remove all dirt, dust, stain, oil, grease, mould, algae etc. and also loose flaking, powdery paint by sanding & scraping. Rust must be removed thoroughly from ferrous substrate.

Repair all cracks, holes, and other surface imperfections with Subrang Classic Wall Putty, ensure the surface is sanded smooth and free from dust. Ensure that new surface is completely dry. Take all necessary measures before the application of Subrang Classic Red-oxide Primer.

Technical Information:

Theoretical Coverage: 11 - 13 m² per liter per coat (Actual Coverage is dependent on substrate condition, application method, application condition, finishing appearance)

Color: Red-Oxide

Volume Solid: 43 % ± 2

Dry Film Thickness: 33 ± 3 um per coat (based on substrate condition)

Finish: Flat

Flash Point: 36⁰C ± 2

Drying Time: Touch Dry 2 - 4 hours (Dependent on temperature and humidity)

Hard dry 24 hours (Dependent on temperature and humidity)

Recoat Interval: 10 - 12 hours (Dependent on temperature and humidity)

Application Method: Brush / Roller and spray, dilute (by volume) the paint 10 – 15 %. (This is recommended method of application Care should be taken to ensure an even application to avoid film defects)

Packing: 0.91 Liter, 3.64 Liters & 14.56 Liters drum

Safety & Precautions

• Make sure there is ample ventilation available before, during and after painting.

• Keep children and pets away from painted areas and appliances.

• When applying paint, it is preferable to wear eye safety goggles and dust mask.

• Never leave opened container unattended.

• To clean paint from your hands, use soap and water only.

Storage & Handling

• Keep away from heat and spark sources, away from direct sunlight.

• Never breathe in dust, mist, gas or vapors from the dry product.

• Keep the containers closed in storage.

• Do not apply during rain/fog/mist/wind or when the temperature is below 5 °C.

• In case of eye contact: Wash with plenty of cold water and immediately consult a physician.

• In case of ingestion: drink plenty of water or milk, do not induce vomiting, & consult a doctor.

• In case of inhalation: remove the person to open fresh air area, provide artificial breathing if needed, and consult a doctor.

Disclaimer:

The information provided on this data sheet is not intended to be completed and is provided as general advice only. It is the responsibility of the user to ensure that the product is suitable for the purpose for which he wishes to use it. As we have no control over the treatment of the product, the standard of surface preparation of the substrate, or other factors affecting the use of this product, we are not responsible for its performance nor would we accept any liability whatsoever or howsoever arising from the use of this product unless specifically agreed to in writing by us. The information contained in this data sheet may be modified by us from time to time, and without notice, in the light of our experience and continuous product development.