SUBRANG CLASSIC MATT ENAMEL

Recommended for use on:

Walls, ceiling, old and new plasters, woodwork, metal, doors, windows, chipboard, and hardboard. It can also be used on concrete and masonry surfaces. Application is to be done after proper dilution (depending on the application- brush, roller or spray) with colorless oil paint thinner / white spirit.

The product is environmentally friendly and is completely free from harmful chemicals such as lead or added mercury etc.

Product Features:

• Sheen with Premium Eggshell Finish

• Easy Application & Superior Leveling

• Hard Wearing, Tough & Durable

• Steam & Water Resistant

• High Opacity & Long Lasting Performance

• Scratch & Stain Resistant

Application Guide

New Concrete Surface:

Sand down the plaster with sand paper or emery stone and apply one coat of Subrang Classic Wall Primer Sealer or Subrang Classic Water Base Primer. Then prepare the surface by applying 2 coats of Subrang Classic Wall Putty after which apply second coat of Subrang Classic Wall Primer Sealer or Subrang Classic Water Base Primer. (As new plastered surfaces are highly alkaline a coat of Subrang Classic Wall Primer Sealer is recommended for better alkali resistance.) Then apply 2 to 3 coats of Subrang Classic Matt Finish Enamel Paint.

All surfaces must be free from dust and dirt. The plaster should be well cured and all dried for at least six weeks before painting. Removing any efflorescence, if any, with stiff scrubbing brush (DO NOT USE WIRE BRUSH). The surface is then prepared in order to remove any plaster nibs.

Coating System: 1 Coat (Primer) + 2 Coats (Putty) +1 Coat (Primer) + 2-3 Coats (Matt Finish Enamel)

Old Painted Surface:

Remove all dust, Dirt and loose adhering or flaked paints by scraping. After scraping apply one coat of Subrang Classic Wall Primer Sealer, which will help the Sealer to penetrate into the surface. Then apply Subrang Classic Wall Putty for filling, to smoothen the surface if required, after which apply second coat of primer. After the surface has been properly prepared apply 2 coats of Subrang Classic Matt Finish Enamel.

Coating System: 1 Coat (Primer) + 1-2 Coats (Putty if required) +1 Coat (Primer if filling putty is applied) + 2 Coats (Matt Finish Enamel)

Wood Work (Timber, Hardboard, Soft-board, Chipboards):

Sand down the surface with sand paper or emery paper and apply one coat of Subrang Classic Primer. Next, prepare the surface by applying 1-2 Coats of Subrang Classic Wall Putty (if required). After filling is dry sand paper the surface and apply 1 coating of primer again. Next apply 2 coats of Subrang Classic Matt Finish Enamel (after preparing the material / diluting as per the application method).

Coating System: 1 Coat (Primer) + 1-2 Coats (Putty if required) +1 Coat (Primer) + 2 Coats (Matt Finish Enamel)

Metal Structure:

Remove all oil, grease, dust, dirt and loose adhering or flaked paints by scarping with scraper, emery paper or sand blasting. Remove all the rust by sanding, rust removing solution or by flame, and then apply one coat of Subrang Classic Red Oxide Primer followed by 2 coats of Subrang Classic Matt Finish Enamel.

Coating System: 1 Coat (Primer) +2 Coats (Matt Finish Enamel)

Technical Information:

Theoretical Coverage: 16-18 m2 per liter per coat (Actual Coverage is dependent on substrate condition, application method, application condition and finishing appearance)

Color: As per shade card

Volume Solid: 48 % ± 2

Dry Film Thickness: 30 ± 3 um per coat (based on substrate condition)

Finish: Matt

Flash Point: 360C ± 2 

Drying Time: Touch Dry 2-3 hours (Dependent on temperature and humidity)

Hard

dry 24 hours (Dependent on temperature and humidity)

Recoat Interval: 10 - 12 hours (Dependent on temperature and humidity)

Application Method: Brush / Roller and spray, dilute (by volume) the paint 10 – 15 %. (This is recommended method of application Care should be taken to ensure an even application to avoid film defects)

Packing: 0.91 Liter, 3.64 Liters & 14.56 Liters drum

Safety & Precautions

• Make sure there is ample ventilation available before, during and after painting.

• Keep children and pets away from painted areas and appliances.

• When applying paint, it is preferable to wear eye safety goggles and dust mask.

• Never leave opened container unattended.

• To clean paint from your hands, use soap and water only.

Storage & Handling

• Keep away from heat and spark sources, away from direct sunlight.

• Never breathe in dust, mist, gas or vapors from the dry product.

• Keep the containers closed in storage.

• Do not apply during rain/fog/mist/wind or when the temperature is below 5 °C.

• In case of eye contact: Wash with plenty of cold water and immediately consult a physician.

• In case of ingestion: drink plenty of water or milk, do not induce vomiting, & consult a doctor.

• In case of inhalation: remove the person to open fresh air area, provide artificial breathing if needed, and consult a doctor.

Disclaimer:

The information provided on this data sheet is not intended to be completed and is provided as general advice only. It is the responsibility of the user to ensure that the product is suitable for the purpose for which he wishes to use it. As we have no control over the treatment of the product, the standard of surface preparation of the substrate, or other factors affecting the use of this product, we are not responsible for its performance nor would we accept any liability whatsoever or howsoever arising from the use of this product unless specifically agreed to in writing by us. The information contained in this data sheet may be modified by us from time to time, and without notice, in the light of our experience and continuous product development.